KGM Australia

KGM-100

KGM-100

KGM-100

Polyurethane Membrane

KGM-100 is a single component moisture curing polyurethane membrane, which is coated over surfaces to form a seamless watertight finish. When particular membrane molecules come in contact with moisture, KGM-100 cures to produce a solid but highly flexible material that will provide you with dependable waterproofing protection.

KGM-100 has a wide range of uses and is designed to waterproof most non-exposed external wet areas for above and below ground construction. Typical areas of application include retaining walls, planter boxes, balconies, non-exposed roof decks, elevator pits and equipment pits, detention tanks as well as tunnels and underground vaults.


KGM-200

KGM-200

KGM-200

Latex Membrane

KGM-200 is a water-based latex polymer emulsion, Class III waterproofing membrane, which incorporates micro fibres thereby internally reinforcing the product. It cures to form a durable, odourless, impervious seamless membrane that resists re-emulsifying after it has fully dried.

It is designed for both internal and non-exposed external applications. Typical areas of application include bathrooms and wet areas, planter boxes, balconies, tiled or topped decks and water tanks.


KGM-300

KGM-300

KGM-300

UV Stable Acrylic Membrane

KGM-300 is a single component, water-based, UV stable, acrylic emulsion waterproofing Class III membrane. It is an elastomeric, environmentally friendly membane which cures to form a durable, UV resistant, odourless, impervious, seamless membrane that resists re-emulsifying after it has fully dried even if immersed in water.

KGM-300 has been formulated for applications requiring long term waterproofing for both exposed and non-exposed external applications. This includes exposed areas of concrete, timber decks & roofs; as well as immersed and underground applications like ponds and planter boxes.


KGM-400

KGM-400

KGM-400

General-Purpose Water-Based Primer

KGM-400 is a single component, general purpose primer used to enhance the bond of water-based coatings. It is a penetrative primer with good adhesion properties.

KGM-400 can be used to prime porous substrates over which a water-based membrane or coating will be applied. This includes internal wet areas, dry surfaces, concrete and masonry substrates and cement-based sheeting.


KGM-450

KGM-450

KGM-450

Multi-Purpose Primer & Sealer

KGM-450 is a high performance, single component primer and sealer used in conjunction with solvent or water-based coatings. It can also be used on dry, low concentrations of moisture within the substrate and green (7-14 day old) concrete.

It is used to prime and seal porous substrates such as concrete and masonry. KGM-450 also provides a deep penetrating barrier against water vapour transmission.


KGM-500

KGM-500

KGM-500

Water-Based Epoxy Primer & Sealer

KGM-500 is a high performance, two-part epoxy primer and sealer used in conjunction with solvent or water-based coatings. It can also be used on damp surfaces to speed up construction time.

It is used to prime and seal porous and semi-porous substrates such as newly laid concrete over which a membrane, paint or coating is to be applied. This includes basements, retaining walls, tanks, timber and concrete floors


KGM-600

KGM-600

KGM-600

Sealant Adhesive

KGM-600 is a fast cure, flexible, high modulus, construction grade, polyurethane joint sealant adhesive.

KGM-600 is used to seal and assist waterproofing to joins, gaps, corners, penetrations, cracks and bonding tiles. It is also used to bond plastic and metal angles to concrete, timber and FC sheeting substrates.

Product Information

Need more information about this product? Please fill out this form and we will get in touch with you shortly.